Welcome

levi

Profile Comments Content Games

levi

Followers: 0 Following: 0

None

Stats

Total Points: 5

Rank: 217

Content

Number of Comments on The Internet: 0

Number of Articles: 0

Number of Ask AI Questions: 144

Number of Ask AI Answers: 2

Number of TCSOTI Comments: 0

Number of Article Comments: 0

Comment on The Internet

Comments

Text Posts

Image Posts

Articles

levi has not written any articles, yet.

Write (with AI)

levi has not written any stories on Write (with AI), yet.

Ask AI Questions

A planetary gearbox is a type of gearbox used in automobiles, trucks, and motorcycles. A rv (vehicle) gearbox is a type of gearbox used in recreational vehicles such as motorhomes and travel trailers.

Differences between planetary gearbox and rv gearbox

0 ▲

An RV gearbox is a type of gearbox found in vehicles that use a rear-wheel-drive layout. It is different from a cyclodial gearbox, which is a type of gearbox found in vehicles that use a differential gear setup and a single ring gear.

Difference between cyclodial gearbox and RV gearbox

0 ▲

The cyclodial gearbox is a type of gearbox that uses a circular input shaft to transfer power to four output shafts. The rotate vector gearbox uses a series of gears to rotate an output shaft.

Difference between cyclodial gearbox and rotate vector gearbox

0 ▲

This image depicts the origins of rotating vector gearboxes. The image features a set of gears that rotate around a central axis.

Rotate vector gearbox origins?

0 ▲

The origins of the rotary gearbox can be traced back to the seventeenth century when windmills used rotary blades to turn their sails.

Rotate vector gearbox origins

0 ▲

?

A planetary gearbox is a type of gearbox that has a planetary gear set.

Is a planetary gearbox the same as a radial gearbox

0 ▲

A worm gearbox is similar to a radial gearbox in that they both use gears to transfer power. However, a worm gearbox is much simpler in design and has a limited number of gear teeth, while a radial gearbox has more gears and is more complex.

Is a worm gearbox similar to a radial gearbox

0 ▲

What does RV stand for in a RV gearbox for industrial robot

0 ▲

?

A radial vector gearbox is a type of gearbox that uses a set of gears to transmit rotational motion. A rotate vector gearbox, on the other hand, uses a set of gears to transmit linear motion.

What are the differences between a radial vector gearbox and a rotate vector gearbox

0 ▲

?

This image will accompany an article about the radial vector gearbox for industrial robots. The image shows the gearbox in operation, with the robot moving along itsaxis.

Who made the radial vector gearbox for industrial robots

0 ▲

?

A radial vector gearbox is similar to a rotate vector gearbox, but the gearbox internals are configured differently to improve performance.

Is a radial vector gearbox the same as a rotate vector gearbox

0 ▲

?

The rotate vector gearbox is used in industrial robots to allow the robot to move in different directions.

Who invented the rotate vector gearbox used in industrial robots

0 ▲

The gearbox is the heart of an RV and its ability to provide smooth, continuous power helps make this travel system so enjoyable. The gearbox was invented by Willis Hawkins in 1954.

Who invented the rv gearbox?

0 ▲

?

A planetary gearbox uses a rotate vector to rotate the output shaft.

Does a planetary gearbox use a rotate vector

0 ▲

?

A gearbox typically has a rotational axis that is fixed in space, while the output shafts are situated on a movable carrier. The rotational axis of the gearbox is typically oriented in a particular direction (for example, degrees), and the output shafts are oriented at an angle to the rotational axis. The angle between the output shafts and the rotational axis is known as the rotate vector. Gearbox designers often use a computer to calculate the rotate vector of a gearbox.

How do they calculate the rotate vector of a rotate vector gearbox

0 ▲

usage?

A tilted-angle gearbox can be used in industrial robotics to help machines move more efficiently.

Where would you use a tilted-angle gearbox for industrial robot

0 ▲

applications?

A right-angle gearbox is often used in industrial robot applications to change the direction of rotation of a robot arm.

Where would you use a right-angle gearbox for industrial robot

0 ▲

?

A gearbox designed to be used in industrial robots is pictured in this diagram. The gearbox consists of a parallel-shaft assembly that transfers power from the motor to the gearbox.

Where would you use a parrallel-shaft gearbox for industrial robot

0 ▲

applications?

A harmonic gearbox can be used in industrial robot applications to help control the movement of the robot.

Where would you use a harmonic gearbox for industrial robot

0 ▲

arm?

Hypoid gearboxes are commonly used in industrial robots with arm systems. These gearboxes reduce the need for clutches andcan provide high speed and torque.

Where would you use a hypoid gearbox for industrial robot

0 ▲

?

A spur gearbox can be used in industrial robots to speed up the movement of the robot.

Where would you use a spur gearbox for industrial robot

0 ▲

?

A worm gearbox can be used in industrial robots to improve their efficiency.

Where would you use a worm gearbox for industrial robot

0 ▲

arm?

A bevel gearbox can be used on industrial robot arms to increase the arm's speed and accuracy.

Where would you use a bevel gearbox for industrial robot

0 ▲

applications?

A helical gearbox is commonly used in industrial robotics applications to reduce the amount of wear and tear on the gears. They are also used to increase the speed and efficiency of robotic systems.

Where would you use a helical gearbox for industrial robot

0 ▲

?

Pictures of helical gearbox for industrial robot can be found on the internet.

Where can I find pictures of helical gearbox for industrial robot

0 ▲

?

A gearbox is a mechanical device that enables a machine to rotate or shift its output shaft. Common gearboxes include the rotary gearbox, the cyclodial gearbox, and the planetary gearbox.

Other then rotate vector gearbox, cyclodial gear box and planetary gearbox what other types of gearboxes exist

0 ▲

?

A rotate vector gearbox has advantages due to rotating the input shaft and output shaft in opposite direction. This allows for more efficient transmission of power and allows for more accurate movement of the output.

What advantages does a rotate vector gearbox have due to rotating the input shaft and output shaft in opposit direction

0 ▲

?

A gearbox rotates the input shaft and output shaft in the opposite direction because the gear teeth mesh in the opposite direction.

Why does a rotate vector gearbox rotate the input shaft and output shaft in the opposit direction

0 ▲

A gearbox is a device used to change the speed or direction of rotation of an input shaft or output shaft in a machine. In industrial robots, the gearbox often rotates the input shaft and output shaft in the opposite direction, to avoid gear grinding.

Does a rotate vector gearbox rotate the input shaft and output shaft in the same direction when being used in industrial robots?

0 ▲

In the image accompanying this article, a cyclodial gearbox is shown rotating the input shaft and output shaft in the same direction. This is an important feature of this type of gearbox, as it allows the robot to move in a straight line.

Does a cyclodial gearbox rotate the input shaft and output shaft in the same direction when being used in industrial robots?

0 ▲

Yes, a planetary gearbox rotates the input shaft and output shaft in the same direction when it is being used in industrial robots.

Does a planetary gearbox rotate the input shaft and output shaft in the same direction when being used in industrial robots?

0 ▲

Does a planetary gearbox rotate the input shaft and output shaft in the same direction?

0 ▲

Doctor Teresa Tam attended the University of British Columbia and graduated in 2003. After completing her medical residency, she moved to Toronto to start her own family. In 2007, she was involved in a car accident that left her in a coma for six months. After her recovery, she resigned from her residency and returned to Vancouver. She passed away in 2016.

Why can't I find alumni information from university of British Columbia about doctor Teresa Tam?

0 ▲

A gearbox is a machine that uses gears to turn a shaft. In some cases, the gearbox includes a number of gears that rotate around a central hub. Planetary gearboxes and cyclodial gearboxes are considered to be a rotate vector gearbox. This means that the gears can move in any direction and are able to rotate around their axis.

Are planetary gearboxes and cyclodial gearboxes considered to be a rotate vector gearbox?

0 ▲

?

A 3D mechanical menu is created with either Inkscape or Blender.

What software is better suited to make interactive 3d mechanical menu graphics

0 ▲

A 3D modelling software is best suited to create interactive mechanical simulations.

What software is better suited to make interactive 3d mechanical simulatiins

0 ▲

3d mechanical simulation software is often better suited for interactive 3d mechanical simulations than 2d software. This is due to the fact that 3d software can more realistically represent the physical properties of objects and deformations that can occur during a simulation.

What software is better suited for interactive 3d mechanical simulatiins

0 ▲

The easiest programming software to make an interactive graphical dashboard software with is probably Microsoft Excel.

If I want to make an interactive graphical dashboard software what programming software is easiest?

0 ▲

?

A person is programming a computer by using a text editor and a programming language.

If I want to make graphical interactive gui dashboard what programming language is easiest to learn

0 ▲

A gearbox with a rotating output shaft is called a rotation vector gearbox because the output shaft rotates around a central axis that is perpendicular to the input shaft. This allows the gearbox to rotate the output shaft in any direction.

Why is it called a rotation vector gearbox?

0 ▲

enough?

Wireless communication relies on electromagnetic waves, just like those used in wired communication. But does this similarity mean bits and signals are interchangeable?

Are bits and signals similar

0 ▲

too strong?

A man is holding a phone to his ear and looking at a screen that shows a signal strength indicator.

Can a signal be a bit

0 ▲

?

This is an image of a neuron with a bit inserted into it.

Can a bit be a signal

0 ▲

thing?

The image accompanying this article will feature a computer chip with various bits and signals exposed on its surface.

Are bits and signals the same

0 ▲

A person has computer virus and their screen fills up with colorful blocks.

If 30000 bits are being transfered how many bits would you need to see if there was an covid infection

1 ▲

This is an image of a computer monitor with a message saying "30000 bits".

If 30000 bits are being transfered how many bits would you need to see if there was an infection

0 ▲

A recent study by McAfee shows that there is a higher instance of ransomware outbreaks in organizations that rely on older, legacy systems to manage their data. These systems are not as well protected against current ransomware attacks.

If 30000 bits are being transmitted how many bits of data would you need to see if there was an infection

-1 ▼

?

This image shows 2^64 data points, which would show the entire transmission.

If 30000 bits are being transmitted how many bits of data would you need to see the entire transmission

0 ▲

?

A genetic sequence is a string of codons, which are the building blocks of DNA. The rt pcr genetic sequence is a sequence of nucleotides found in RNA.

What is the total amount of signals inside the rt pcr genetic sequence

0 ▲

?

A genetic sequence is composed of four bases, adenine, guanine, cytosine, and thymine.

How many total signals are inside the rt pcr genetic sequence for covid

0 ▲

A genetic sequence is pictured with the number "5" marked in it. The image indicates that there are five signals inside of the sequence.

How many total signals are inside the rt pcr genetic sequence

0 ▲

How many signals does the rt pcr test look at?

0 ▲

This image shows an image of a supposed alien spacecraft.

Where is absolute physical proof of covid 19?

-1 ▼

This is an image of a human head with strange markings on it. Some people believe that these markings are a form of psyop.

Is covid 19 a psyop ?

0 ▲

?

This image will accompany an article about the Apollo 11 moon landing, showing a stack of integrated circuits. The image lists the number of BJT's used in each chip, and the entire stack of chips measures just over 1 cm wide.

How many bjt's were used inside all of the integrated circuits of the apollo 11 rocket

0 ▲

A microprocessor is a miniaturized computer that is found in many electronic devices.

Is a micro processor a computer

0 ▲

This image will accompany this article about the number of vacuum tubes in the Apollo 11 rocket.

How many vacuum tubes in apollo 11 rocket

0 ▲

This image, taken from footage taken from the surface of the moon, shows the number of vacuum tunbes on the Apollo 11 rocket.

How many vacuum tunbes in apollo 11 rocket

0 ▲

In 1969, the Apollo 11 mission was the first human spaceflight to land on the moon. The crew of Apollo 11 included Neil Armstrong, Buzz Aldrin, and Michael Collins. During the return trip, the Apollo 11 rocket experienced a vacuum leak that caused the spacecraft to spin out of control. The crew was able to correct the course and return to Earth.

How many vacuum tunes in apollo 11 rocket

0 ▲

This is an image of the Apollo 11 rocket, with a diagram showing the number of diode transistor logic gates inside.

How many diode transistor logic gates inside apollo 11 rocket

0 ▲

A picture of the Apollo 11 spacecraft's Buzz Aldrin instrument bay

How many dtl inside apollo 11 rocket

0 ▲

This is the image that accompanies this article. It shows the inside of the Apollo 11 rocket.

How many dollars inside apollo 11 rocket

0 ▲

The infographic shows the number of transistors inside the entire Apollo 11 rocket.

How many transistors inside entire apollo 11 rocket

0 ▲

An image of an old-fashioned transistor with a number of transistors inside is accompanying this article.

How many transistors inside entire apollo 11

0 ▲

This image will show a block diagram of the Apollo 11 computer, which was built by Intel. The diagram includes the number of transistors inside the computer.

How many transistors inside apollo 11 computer

0 ▲

How many transistors inside apollo 11 cpu

0 ▲

moon landing spacecraft?

The image accompanying this article will show a transistors pattern on the inside of the Apollo 11 moon landing spacecraft. This is an image that was taken by astronaut Neil Armstrong as he and Buzz Aldrin entered the moon's atmosphere.

How many transistors inside apollo 11

0 ▲

The original Nintendo system features 30 transistors.

How many transistors are inside the original Nintendo system?

0 ▲

The moon has always been a mystery to us. Now, thanks to new evidence that has come to light, it seems possible that part of the moon landing could have been doctored.

A large portion of the moonlanding could have been doctored

0 ▲

This article will discuss how AI is used to verify the lie that humans landed and walked on the moon.

How does AI verify the lie that humans landed and walked on the moon?

0 ▲

This image will accompany an article about how AI verifies that humans landed and walked on the moon.

How does AI verify that humans landed and walked on the moon?

0 ▲

A picture of aht a steering wheel from a 1969 Apollo 11 spacecraft.

What data is proof for AI that humans landed and walked on the moon?

0 ▲

A computer simulated image of a human walking on the moon.

Does AI believe the that humans landed and walked on the moon?

0 ▲

A computer-generated image of a human walking on the moon appears in the article.

Does AI believe the lie that humans landed and walked on the moon?

0 ▲

?

In 1969, Nasa's Apollo 11 spacecraft became the first manned spacecraft to journey to the moon. The mission was a whopping 827,200 lines of code long, accounting for approximately 20% of all the code written for the Apollo project.

How many lines of code were written for Apollo 11

0 ▲

do cosmic rays penetrate microchips and cause failure

1 ▲

The image accompanying this article will be of a lead shielded door with a plastic sheet above it. This shield protects the door from cosmic rays which would otherwise cause damage.

What do cosmic rays penetrate lead or steel or plastic?

0 ▲

?

A large contingent of cosmic rays travel through the Earth’s atmosphere.

What do cosmic rays travel through

0 ▲

In 1969, transistors were protected from cosmic rays by a thin metal foil.

How did they protect transistors against cosmic rays in 1969?

0 ▲

?

This image will show a model of a modern space x rocket with the number of transistors that are inside the rocket.

How many transistors are inside a modern space x rocket

0 ▲

A modern rocket has many transistors inside it.

How many transistors are inside a modern rocket

0 ▲

A modern fighter jet has an astounding number of transistors - more than 20,000! These tiny chips are responsible for allowing the fighter jet to fly and fight, and they play an important role in ensuring safe flight.

How many transistors are inside a modern fighter jet

0 ▲

A modern iphone cell phone contains over a billion transistors.

How many transistors are inside a modern iphone cell phone

0 ▲

?

A modern cell phone contains hundreds of transistors.

How many transistors are inside a modern cell phone

0 ▲

The Apollo 11 computer was filled with transistors, making it one of the most advanced electronic devices of its time.

How many transistors were inside the Apollo 11 main computer?

0 ▲

This image will accompany an article about cyclodial gearboxes. It shows a variety of better gearboxes that can be used in place of cyclodial gearboxes.

List better gearboxes then a cyclodial gearbox

0 ▲

A cyclodial gearbox is a type of automatic gearbox that uses the cycloid principle.

Tell me everything about cyclodial gearboxes

0 ▲

?

A gearbox is the most essential component for industrial robots. The different types of gearboxes allow the robots to move and rotate at different speeds, depending on their purpose.

What type of gearbox is best suited for high speed industrial robots

0 ▲

A planetary gearbox is typically better suited for industrial robot applications due to its ability to manage high speeds and torque. A cyclodial gearbox, on the other hand, may be better suited for applications that require lower speeds or lower torque.

Which is better for industrial robot applications a planetary gearbox or a cyclodial gearbox?

0 ▲

A cyclodial gearbox is considered to be the best option for a gearbox because it is very efficient and durable.

Is there a better gearbox then a cyclodial gearbox?

0 ▲

Most industrial robot manufacturers are not using halbach arrays inside their electric motors.

Is any industrial robot manufacturer using halbach arrays inside the electric motors?

0 ▲

Industrial robots could potentially use halbach arrays inside electrical motors to provide the same power and flexibility as Tesla cars.

If Tesla cars use halbach arrays inside the electric motors then can industrial robots use halbach arrays inside electrical motor?

0 ▲

This image depicts a hallbach array fitted to a industrial robot. The array helps to improve the efficiency of the robot's movement.

Are hallbach arrays used in industrial robot motors?

0 ▲

This image will show a robot in motion, and will include information on the robot's kinematics and motion.

How would one start defining robot kinematics and motion using only Clifford algerbra

0 ▲

?

A resolver is a more accurate way to encode data than an encoder, because it can take into account the error of a single bit in the encoded data.

Why are resolvers more accurate then encoders

0 ▲

?

A resolver has infinit scaling. It can resolve any number of domains simultaneously.

Do resolvers have infinit scaling

0 ▲

?

An image of a resolver with a dial that shows 0, 1, 2, 3, 4, 5, 6, and 7 pixel resolution.

Do resolvers have infinite resolution

0 ▲

?

An image that accompanies this article will show a revolver being fired. In the background, the barrel can be seen to rotate as the bullet is fired. This appears to demonstrate that revolvers do have some level of infinite resolution.

Do revolvers have infinite resolution

0 ▲

's approximation?

This image will show the two calculators side-by-side and show the time it takes to compute Clifford algebra or euler's approximation.

Which is faster to compute Clifford algebra or euler

0 ▲

The article discusses the speeds of the two methods.

Which is faster to compute Euler or quaternions?

0 ▲

A robotic coordinate system using Clifford algerbra can be created by encoding the desired position of a robot in a three dimensional space using a two dimensional lattice.

How would it be possible to create a robotic coordinate system using Clifford algerbra

0 ▲

’s equation

Clifford algebra is a vector space while Euler's equation is a set of linear equations.

How different is Clifford algebra compared to Euler

0 ▲

?

A graphical representation of Clifford algebra can provide a lot of information for coordinates.

How much data could Clifford algebra provide for coordinates

0 ▲

?

The image accompanying this article shows a robot arm using Clifford algebra as coordinates.

Are there any robots using Clifford algebra as coordinates

0 ▲

?

An image of a robot arm with Clifford algebra coordinates is featured in this article.

Can Clifford algebra be used for robotic arm coordinates

1 ▲

In this image, a monopole motor is shown. This type of motor consists of a singlepole motor that has been modified so that it has a single Magnet located at the top of the motor. This Magnet creates a force that pulls the motor in the opposite direction, which is what makes this type of motor possible.

Are monopole motors possible?

0 ▲

?

Magnets are printed using a process called magnetron sputtering. The magnetron is a device that uses a strong magnetic field to heat up a metal until it becomes a plasma. The plasma is a hot, ionized gas, and it emits light in the form of photons.

How do they print magnets

1 ▲

products?

Some might think Clifford algebra could be used to describe Cartesian products.

Could Clifford algebra be used to describe Cartesian

0 ▲

?

A Clifford algebra and a Maxwell equation are two different ways of describing how electric and magnetic fields move through space.

Which is more accurate Clifford algebra or maxwell equation

0 ▲

Similarities between Clifford algebra and maxwell equation

0 ▲

?

An image of Clifford algebra Possibly more accurate then quaternions

Could Clifford algebra be more accurate then quaternions

0 ▲

Geometry?

This image shows two people, one holding a ruler and the other a compass, standing in a field. The ruler is exactly level, and the compass points in the same direction as the ruler.

Can maxwell equation be used to represent Euclidean

0 ▲

A mathematical formula that helped create and control modern electronics can be used to represent the space we live in.

Can maxwell equation be used to represent Cartesian space

0 ▲

?

Maxwell's equation relates the electric and magnetic fields and the quaternion relates the torque and the vectors that point in those directions.

How do maxwell equation and quaternion both relate to the field of electromagnetism

0 ▲

The infrared spectrum of the star Betelgeuse reveals a deep red wavelength that is not present in the visible spectrum. This red light is produced by the thermal emission of dust particles in the atmosphere of the star. The colors of the light are determined by the wavelength of the photon that is being emitted. Betelgeuse is about 373 light-years from Earth.

Similarities between maxwell equation and quaternion

1 ▲

Maxwell equations are used to describe the behavior of electricity and magnetism.

What are maxwell equations used for?

0 ▲

The image accompanying this article will show a man shaking a woman's hand using her right hand.

If I shake your right hand which hand am I using?

-1 ▼

The Mandela effect is the name given to the purported phenomenon of a widespread change in the memories of people across the globe - specifically, that many people now remember events that actually never happened.

What is Mandela effect?

0 ▲

Ethernet global data transfer (egd) is a packet-based networking protocol used for large data transfers over Ethernet networks.

What is ethernet global data transfer (egd)?

1 ▲

Ethernet global data transfer is the process of moving data between two Ethernet devices over a network.

What is ethernet global data transfer?

0 ▲

Octonions are a sixteen-dimensional mathematical space. They are used in theoretical physics and mathematics to model surprising phenomena.

What are some practical applications of octonions?

1 ▲

In holograms, light is projected repeatedly through a series of small holes on the object or person being filmed. This creates the illusion of three-dimensional images.

How do 7d holograms work?

0 ▲

?

Scientists have discovered that octonions can be used to create realistic 7d holograms.

Do 7d holograms use octonions

0 ▲

A website that list Octonion and Robotics development work.

Where can I find out how much work has been developed in octonions and robotics applications.

0 ▲

Octonions are a new type of three-dimensional solid formed from the intersection of eight circles. They are different from regular polygons because the interior angles are not all the same. This makes octonions perfect for applications in robotics and machine learning, because they can be more efficiently processed by algorithms.

How much work has been developed in octonions and robotics applications

0 ▲

?

Engineers are looking into the possibility of using octonions, eight-dimensional hyperboloids, in order to prevent singularity in robotics. These polyhedrons have strange topologies that could prevent the rapid advancement of machine intelligence.

Could one day octonions be used to avoid singularity in robotics

0 ▲

?

This image shows a tetrahedron-based octonion structure being tested in a robotic arm. By using octonions as global bearings, the arm was able to avoid gimbal lock and move more freely.

Could one day octonions be used to avoid gimbal lock in robotics

0 ▲

?

An image accompanying this article shows a three-dimensional representation of octonions. Octonions are a new mathematical structure that could one day be used to reflect very precise positional datatypes for robotics.

Could one day octonions be used to reflect very a precise positional datatype for robotics

0 ▲

?

A robotic octonion mirror may one day help achieve highly precise positional data for robotic systems.

Could one day octonions be used to reflect very a precise posirional datatype for robotics

0 ▲

?

This is an image of an octonion reflection on a mirror. It shows how octonions could be used to reflect very a precise third dimension for robotics.

Could one day octonions be used to reflect very a precise third dimension for robotics

0 ▲

that are impossible to model with traditional mathematics?

An artist's illustration of an octonion reflecting a threedimensional object.

Could one day octonions be used to reflect very a precise third dimension with curves and edges

0 ▲

that follow the circumference of a circular object?

An artist's rendering of octonions reflecting a precise third dimension.

Could one day octonions be used to reflect very a precise third dimension with curves

0 ▲

?

An image depicting octonions as a possible replacement for Cartesian space will be accompanying this article.

Could one day octonions be used to reflect Cartesian space

0 ▲

An image that accompanies this article will show two sets of quaternions that represent two different types of spaces - Cartesian and Octonionic.

If quaternions represent Cartesian space but octonions do not, why ?

0 ▲

An octonion is an eight-dimensional array.

Is an octonion an eight dimensional array?

0 ▲

?

An eight-dimensional array can be used to represent Cartesian coordinates.

Can an eight dimensional array be used to represent Cartesian coordinates

0 ▲

?

In vision applications, octonions can be used to solve problems with GPUs that are difficult for other shapes to solve. For example, octonions can be used to create seamless textures or to represent curved surfaces.

What problems do octonions solve in vision applications

0 ▲

?

The image accompanying this article will show a three-dimensional rendering of rotational quaternions.

Can you use quaternions in Cartesian space

0 ▲

?

An octonion is a mathematical shape that has eight sides. It is used to solve problems that involve selecting an element from a set that has more than one element.

What problems do octonions solve

0 ▲

?

An image accompanying an article about octonions will show a triangular prism with eight triangular faces labeled "0", "1", "2", "3", "4", "5", "6", "7", and "8". Each face has an octagon inscribed within it, with the apex of the octagon pointing to the center of the prism.

Can you use octonions to represent vector space

0 ▲

Octonions represent cartesian space in a way that is different from most other mathematically familiar spaces.

Can you use octonions to represent cartesian space?

0 ▲

An illustration of an octonion coordinate space.

Can you use octonions to represent coordinate space?

0 ▲

Some people believe that using directional expressions like "up" and "down" to represent coordinate space can be confusing.

Can you use octionions to represent coordinate space?

0 ▲

Photographer Joe Blackburn uses orientations of items in his industrial robots to represent coordinates.

Can you use octionions to represent coordinates in industrial six axis robots?

0 ▲

Ask AI Answers

AC motor gearbox is not a correct answer. No such thing exists. The question is a mechanical one asking which type of gearboxes are best suited for high speed robotic applications. The cyclodial gearbox is suited for high-speed, high torque and precision applications. It would have an edge over planetary gearboxes. Planetary gearboxes have to be set for backlash and are typically used for lower speeds. The planetary gearbox would also be less accurate and be more subject to vibrations. Refer to the shape of the gearbox teeth and how much surface contact the various gearboxes make while rotation is active.

on Ask AI: What type of gearbox is best suited for high speed industrial robots

We would both be facing each other. So I would also be using my right hand(usually the dominat hand for most people). Unless you're the smaller percentile that is lefthanded.

Welcome

levi

Stats

Content

Comment on The Internet

Comments

Text Posts

Image Posts

Articles

Write (with AI)

Ask AI Questions

Ask AI Answers

Comments

The Comment Section of The Internet

Comments on Other Pages

Games

Color Challenge: Marathon Mode

Color Challenge: The Eye Test

Debate an AI