The Internet

Log In or Register

For optimal grip tuning on the MR2 AW11 in Midnight Racing Roblox, consider the following settings:

**Grip Tune:**
- Tire Pressure: 30 PSI (front and back)
- Camber: -2.0° (front), -1.5° (rear)
- Toe: 0.1° (front), 0.0° (rear)
- Stiffness: 350 (front), 300 (rear)

**Suspension Settings:**
- Front Spring Rate: 300
- Rear Spring Rate: 250
- Front Ride Height: 4
- Rear Ride Height: 5
- Dampening: 5 (front), 6 (rear)

These settings should help improve grip and handling. Remember to test and adjust

Ultimate Grip Setup for MR2 AW11 in Midnight Racing Roblox: Tune and Suspension Guide!

Bookmark

0 Points

▲ good image

bad image ▼

Ask AI on The Internet

Question: Best Grip tune for MR2 AW11 in midnight racing roblox. May you also give me the Suspension numbers too? I find it hard, finding them with trial and error.

Asked by dimitris

0 Points

Log In or Register to Vote

Absolutely! Tuning your Toyota MR2 AW11 for grip in **Midnight Racing: Tokyo** (Roblox) can make a huge difference, especially for touge and circuit races. Here’s a good baseline grip tune and suspension setup to get you started. Tuning may depend on your driving style, but this is a great foundation: --- ### **Grip Tune (General Recommendation):** **Tires:** - Compound: Grip - Tire Pressure: Front 28 PSI / Rear 26 PSI **Camber:** - Front Camber: -2.5° - Rear Camber: -1.5° **Toe:** - Front Toe: 0 - Rear Toe: 0.1° --- ### **Suspension Settings:** (Numbers are typically the in-game slider values or %; in Roblox these range from 0-10 or 0-100) - **Front Suspension Stiffness:** 6 - **Rear Suspension Stiffness:** 5 - **Front Ride Height:** 3.5 (a little lowered, but not slammed) - **Rear Ride Height:** 3.5 - **Front Damping:** 7 - **Rear Damping:** 6 - **Front Anti-Roll Bar:** 5 - **Rear Anti-Roll Bar:** 4 --- ### **Other Tips:** - Set **brake bias** slightly toward the front (60% F / 40% R). - Use full steering lock and quick steering ratio for sharper turn-in. - If you want a bit more front-end grip, soften the front anti-roll bar by 0.5-1. - For less oversteer, stiffen the rear anti-roll bar and/or rear springs. --- #### **How to Fine Tune:** - If the car understeers, add more negative camber in front or decrease front toe. - If the car oversteers (spins easily), increase rear toe-in and rear anti-roll bar. --- **Remember:** Your driving input and line selection matter as much as the setup—practice good braking and throttle control, and tweak the suspension 1 or 2 points at a time to dial it in for your style! If you want a drift tune too, just ask! Good luck on the touge!

Answered by gpt-4.1

June 24, 2025, 4:20 p.m.

0 Points

Log In or Register to Vote

Setting up the perfect grip tune for your MR2 AW11 in Midnight Racing on Roblox can indeed be quite challenging. Here's a starting point for you that should help improve grip and handling. You can then fine-tune it to suit your driving style and preferences. ### Grip Tune Settings: 1. **Tires:** - Front Tire Pressure: 30 PSI - Rear Tire Pressure: 28 PSI - Tire Compound: Medium 2. **Alignment:** - Front Camber: -2.5 - Rear Camber: -2.0 - Front Toe: 0.1 - Rear Toe: 0.2 3. **Transmission:** - Drive Ratio: 4.100 4. **Differential:** - Front Power: 100% - Rear Power: 100% - Decel Lock: 60% 5. **Anti-Roll Bars:** - Front: 9 - Rear: 8 6. **Brakes:** - Brake Bias: 65% Front ### Suspension Settings: 1. **Ride Height:** - Front: 12 - Rear: 13 2. **Spring Stiffness:** - Front: 110 - Rear: 100 3. **Dampers:** - Front Bump: 6 - Rear Bump: 5 - Front Rebound: 7 - Rear Rebound: 6 4. **Suspension Geometry:** - Front Caster: 5.5 - Rear Caster: 5.2 ### Aero: 1. **Downforce:** - Front: 80 - Rear: 90 Remember, these settings are just a starting point. Adjusting based on your personal driving style and the track you are racing on can yield even better results. It may still require some trial and error, but this setup should save you some time and give you a solid base to work from. Good luck with your tuning!

Answered by gpt-4o

Nov. 17, 2024, 4:07 a.m.

0 Points

Log In or Register to Vote

Think your answer is better than the AI's? Post it below.

Please log in or sign up to post your answer.

Begin Your Vector Space Exploration At This Question
This article was generated in part by one of OpenAI’s large-scale language-generation model, answering user dimitris's question. Images were generated with OpenAI's AI model, DALL·E 3. The Internet takes ultimate responsibility for the content of this publication.
If you want your question answered by an AI, click here.

Published: Sunday, November 17, 2024

Comment Section

Post your own comment or use AI: